![\"Custom](\"http:\/\/motorcyclemojo.com\/wp-content\/uploads\/2019\/08\/Custom-1966-250-Ducati-Street-Scrambler-300x200.jpg\")
But that didn\u2019t stop Tayler \u2013 who lives on a rural property west of Calgary \u2013 from buying the Ducati. He bought it on the spot, shipped the bike home and promptly dismantled it. That\u2019s when the research began \u2013 and keep in mind these were the days before the Internet. Phone calls and letters led Tayler to a supplier in Seattle, from which he managed to purchase an original parts book.<\/p>\n
\u201cI was very impressed by the high-quality diagrams that really allowed me to zero in on what was missing on this Ducati,\u201d Tayler says. \u201cThe headlight was wrong [and] it was missing the taillight and the air cleaner and so many other small parts and pieces.\u201d<\/p>\n
Tayler is no stranger to motorcycles and restoration projects. That\u2019s thanks to his dad, Ted, who was trained as a mechanic in England before the family immigrated to Canada. Tayler was seven when they arrived in Calgary in the late 1950s, and Ted got a job as a mechanic at Bert & Jack\u2019s Garage, then a well-known service and repair shop that focused on British automobiles.<\/p>\n
Mechanical Background<\/strong><\/p>\n That Tayler\u2019s first motorcycle was of British manufacture should come as no surprise. He and his dad put an early-1950s BSA Bantam back together, and the small 125 cc two-stroke, single- In the early 1990s, when the opportunity to buy a 1968 Triumph Bonneville presented itself, Tayler bought that bike. Then he purchased and restored a 1969 Norton Commando. It was only a short time after completing the Norton restoration that Tayler discovered the languishing Ducati.<\/p>\n The Way the Factory Designed It<\/strong><\/p>\n As purchased, Tayler says, the only really nice part of his Ducati Scrambler project was an existing orange, metal-flake paint job on the gas tank that obviously wasn\u2019t stock. While he\u2019s something of a purist when it comes to putting something back together as close as possible to the way it left the factory, Tayler isn\u2019t averse to changing a paint colour \u2013 but the orange didn\u2019t work for him. He also likes to polish most aluminum pieces until they gleam.<\/p>\n With the Ducati apart, Tayler discovered the frame was bent slightly. So, he delivered the chassis to Greg Miguez at Greg\u2019s Cycle Ltd. to have the tubes straightened. That motorcycle shop is one of Calgary\u2019s longest-lived independents. Miguez began in 1970 by selling CZ, Jawa and Moto Guzzi motorcycles while servicing other brands. Now, he focuses on the off-road market, but continues to offer his repair and welding services to the local motorcycle community.<\/p>\n Definitive Parts Source<\/strong><\/p>\n \u201cI sent a very long list of parts I\u2019d need to Henry,\u201d Tayler says. \u201cHenry was like a walking encyclopedia about the Ducati. He gave me a lot of info and sold me a lot of parts.\u201d<\/p>\n Hogben was something of a legend among Ducati owners, having built and tuned several single-cylinder machines that have won races, including a 250 single that won an American Historic Racing Motorcycle Association championship in the hands of Jay Richardson. Hogben, something of a man of mystery, When Tayler took the wheels of his Ducati apart, he discovered the rear hub was abused to the limit. A replacement came from Hogben, and Tayler set about polishing the front and rear hubs, replaced the bearings and ordered new spokes. The original Ducati rims were tweaked back into shape and rechromed before being laced to the freshly serviced hubs. Dunlop Gold Seal tires were levered onto the rims to complete the rolling stock. Brake shoes were renewed at the same time. Once the frame was straightened, Tayler bead-blasted it and the swingarm before painting the tubes with black paint using a brush \u2013 which is how the finish was applied at the Ducati factory. Tayler rebuilt the rear shocks with new seals and the forks were restored with new seals, polished lowers and painted shrouds. Paint and Decals<\/strong><\/p>\n To replicate the factory paint job on the gas tank, Tayler borrowed an original tank from another local Ducati enthusiast. Decals were sourced from Hogben, and the tins were delivered to Guy St. Pierre at Cyclemania Artworks in Okotoks, Alta. While St. Pierre has retired and closed his shop, he still accepts paint jobs on occasion.<\/p>\n The seat on the Ducati had already been restored when Tayler bought the bike. However, just about every nut and bolt was replaced with proper stock Ducati parts \u2013 most of them sourced from Hogben, who also supplied a correct headlight and taillight, hand controls and many of the rubber pieces.<\/p>\n \u201cThe exhaust baffle I added to the tailpipe and the mirror are about the only things on the Ducati that don\u2019t truly belong on it,\u201d Tayler says.<\/p>\n Not a Highway Bike<\/strong><\/p>\n When the restoration was finished, the Ducati fired up and ran fine. Tayler rode it to the end of his driveway and ventured out on the two-lane asphalt highway that runs by his house. He travelled only a kilometre or two before he realized the machine, as it was set up, was not going to be a good highway motorcycle. Hoping to make the Ducati somewhat friendlier on the road, Tayler bought different-sized sprockets to alter the gearing from Hogben. Tayler tried again, but was disappointed with the outcome once more, believing he\u2019d hold up traffic anytime he rode the Ducati on the highway.<\/p>\n \u201cThat 250 cc motor is beautiful and it runs flawlessly, but it\u2019s just not fast enough for around here,\u201d he says. \u201cIt was really meant to be used off-road or on a city street.\u201d<\/p>\n For now, the Ducati\u2019s fluids have been drained and the bike remains a showpiece only. If Tayler does want to hit the road, he has larger machines that will keep up with traffic, including a Honda CBX \u2013 and that\u2019s a motorcycle definitely meant for the highway.<\/p>\n","protected":false},"excerpt":{"rendered":" After being neglected and covered in dust, this little Italian Scrambler gets a new lease on life Almost 25 years ago while on holiday in the town of Sidney, B.C., Steve Tayler was walking down a street when he noticed an old motorcycle at rest behind a dusty, unwashed window in a small commercial building. […]<\/p>\n","protected":false},"author":1,"featured_media":51475,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"ngg_post_thumbnail":0,"footnotes":""},"categories":[373,1711],"tags":[],"yoast_head":"\n
\ncylinder bike was Tayler\u2019s first real ride. A brand-new Honda 90 followed, but Tayler\u2019s attention soon turned to British sports cars \u2013 specifically, a 1972 MGB GT.
\nHe\u2019s restored this MGB twice and still owns it and several other British cars that he\u2019s reconditioned from the ground up.<\/p>\n![\"Engine](\"http:\/\/motorcyclemojo.com\/wp-content\/uploads\/2019\/08\/Engine-of-a-Custom-1966-250-Ducati-Street-Scrambler-300x200.jpg\")
In 1966, the 250 cc four-stroke, single-cylinder Ducati line consisted of the Monza road touring bike, the off-road Scrambler and the Mach 1 competition models. These singles feature a bevel gear-driven overhead camshaft, and compression ratios varied across the 250 cc range: 8:1 in the Monza, 9.2:1 in the Scrambler and 10:1 in the Mach 1. All three models featured a similar single downtube steel chassis, but the competition-oriented Mach 1 offered the cleanest lines, complete with its clip-on bars and racing-style saddle.<\/p>\n![\"Spedometer](\"http:\/\/motorcyclemojo.com\/wp-content\/uploads\/2019\/08\/Spedometer-of-A-Custom-1966-Ducati-Street-Scrambler-300x200.jpg\")
During Tayler\u2019s search for parts, he found Henry Hogben of Ducati Singles Restorations in LaSallette, Ont., who is an expert on Ducati singles.<\/p>\n
\nlost his right arm earlier in life, but that didn\u2019t stop him from becoming a wizard with a wrench. He also continued to ride and set up a Ducati 450 with its clutch and front brake levers on the left handlebar together with a thumb throttle from a snowmobile. (Hogben died late in September in 2010.)<\/p>\n
\nSlap on the Paint \u2013 But With a Brush?<\/p>\n
\nTayler took the engine\u2019s cylinder and head to Mike Briggs at Performance Cycle & Auto in Calgary. Briggs bored out the cylinder to fit an oversized piston sourced from Hogben, installed new valve guides and cut the seats for replacement valves. Then, with the crank journals polished and new bearings and seals installed, the engine components were delivered to Tayler\u2019s friend, Mike Quantz. It was Quantz who put the engine back together.
\nA new Veglia speedometer came from the now-defunct Domi Racer\/Accessory Mart shop that was based in Cincinnati, Ohio. At the time, Accessory Mart was a treasure trove filled with parts for British and European motorcycles. The company was liquidated in 2013.<\/p>\n